How to transfer woodcarving
Carving on wood can be done in several ways, which include the following 5 sections:
1. Carbon transfer by carbon: In this method, first we put the carbon on the wood, then we put the design on the carbon and we draw on the design lines with a pencil and then we remove the design and carbon and the design is transferred on the wood. . This method has many uses in woodcarving.
2. Transfer the design directly: In this method, the inlaid person must be completely proficient in the design and draw the design directly on the wood. The inlaid person must draw the design perfectly symmetrically on the wood. This is the easiest way, as long as the inlaid person is involved in the design.
3. Transfer of the design by photocopy method: In this method, a photocopy design is prepared and it is glued to the desired wood row, then they start carving from the attached design. This method takes less time, but in the end it doesn’t work.
4. Needle transfer: In this method, the design is drawn on paper and then dotted on the lines of the design with a round bottom needle. Then some soot is poured into a sock, thin and put the design on the wood and hit the sock on the creases and thus the lines of the design are drawn on the wood as a crease. This method is very time consuming and today someone from It does not use. In addition, as the hand is drawn on the lines, the lines are cleared.
5. Transferring the design by oiling the paper: In this method, the design is drawn on the sewing paper, then it is impregnated with oil or oil, then the design is placed on the wood and drawn on the lines with a pencil, and thus the design is transferred on the wood. . This method is the most widely used.