The steps of inlaid wood work

, Carving, wood carving work, Traditional arts, Carving work steps

A good inlay should have a smooth, even background. Flowers and inlaid shapes should be symmetrical and equal. Distances should be the same. Use flawless wood.
1. First, the inlay person must select the inlay design.
2. Then the inlay must transfer the design on the wood.
3. Clamp the workpiece and oil the wood surface if needed to soften the wood.
4. After some time with Shafreh cave, the design should be separated from the background.
5. Then smooth the ground with the flat groove. This can also be done with a child-friendly device.
6. Then he shaped the design with different caves and decorated them.
In woodcarving, the left hand of the cave and the hammer with the right hand are usually taken and used. How to keep the cave and its angle on the wood determines the amount of load removal from the wood. If the angle of the razor blade is on the wood, it is high with the wood surface. The loading rate increases and if this angle decreases, the loading rate decreases. Be careful not to pull the cave vertically backwards when you hold the cave vertically and tap it to draw a line.
Instead, the cave should be moved to the left and right and the wood removed. After finishing the work, you can polish the work surfaces with sandpaper, which is usually done by painters when painting. Try not to hit the cave with the palm of your hand. Instead, do this with a hammer, as this can damage the nerves in your hands and cause pain in your wrists after a while. Before woodcarving, it is very important to choose wood. Wood without knots, strong, with fine and straight texture is one of the important factors in choosing wood. Of course, they also carve on materials other than wood. Like ivory, bone and shellfish that are embedded in wood.